Ipu Pcb - Canon GP200 Service Manual

5) Remove the screw, and remove the CCD unit
retaining spring e; disconnect the connector
r, and pull off the flat cable t to remove the
CCD unit.
5 3
Figure 4-508
Caution:
Do not remove any paint-locked screws.
Particularly, never remove the screw y.
6
Figure 4-509
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
3
4
6
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
C. IPU PCB
1. Removing the IP PCB
1) Remove the copyboard glass, and remove the
CCD unit cover.
2) Return the No. 1 mirror mount to home posi-
tion.
3) Remove the four screws w, and move the IP
cover q to the front; then, remove it while lift-
ing its rear first.
1
2
2
Figure 4-510
2 3
2
4–29