Canon GP200 Service Manual page 248

3. OPERATIONS AND TIMING
a. Multi-Output Tray-1/2 Input/Output Ports (1/2)
Address Bit
ST-A 0 Guide bar motor drive signal 1
1 Guide bar motor drive signal 2
2 Guide bar motor drive signal 2
3 Guide bar motor drive signal 4
4 Guide bar motor drive signal ON
signal
5 Stapler motor drive signal 1
6 Stapler motor drive signal 2
7 Stapler swing motor drive signal
ST-B 0 Sorter feeding motor drive signal
1 Tray feeding motor drive singal
2 Not used
3 Add Staple LED ON/OFF
4 Stapler LED ON/OFF
5 Not used
6 Paper on tray indicator
7 PCB internal signal
ST-C 0 Not used
1 PCB internal signal
2 Bin feeding motor clock (PI2)
3 Not used
4 Tray feeding motor clock (PI6)
5 Lead cam HP sensor (PI1)
6 PCB internal signal
7 Bin unit delivery sensor (P3)
ST-EX-A 0 Not used
1 Not used
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
ST-EX-B 0 Stapler cover open/closed detection
(MS5)
1 Joint sensor (MS3)
2 Stapler safety sensor (MS6)
3 Stapler position sensor (PI4)
4 Tray position detection (PI12)
5 Guide bar HP sensor (PI5)
6 Stapler HP sensor (MS4)
7 Stapling HP sensor (MS7)
3–194
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Indication
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Signal Jack
Pulse signal
Pulse signal
Pulse signal
Pulse signal
1: motor ON.
1: motor CW.
1: motor CCW.
1: motor ON.
Pulse signal
Pulse singal
STEMP J9-5 0: ON.
SPLOK J9-4 0: ON.
TRIND J15-1 1: ON.
BFMC J8-2 Pulse input
TFMC J11-11 Pulse input
LCHP J8-4 1: Lead cam horizontal.
BPDY J9-1 0: paper detected
SPLON J17-2 1: Open.
TOP J3-3 1: Released.
SPLSFT J17-4 1: Safety switch ON.
SPLPD J17-3 0: At HP.
TRP J12-7 1: At HP.
GBHP J4-6 1: At HP.
SPUHP J17-3 1: At HP.
SPLHP J7-8 1: At HP.
Logic