Canon GP200 Service Manual page 32

1. GENERAL DESCRIPTION
Key
SPECIAL FEATURES
DIF. Size Original
Thin Sheet Original
Margin
Left Margin
Right Margin
Top Margin
Bottom Margin
Area Desig.
Framing
Blanking
Negative/Positive
Reversal
Sharpness
Frame Erase
Sheet Frame
Erase
Original Frame
Erase
Book Frame
Erase
Binding Erase
1–22
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
You can use originals of different sizes using a feeder. (The originals
may be of different lengths but must be of the same feeding width.)
You may use an ADF when copying thin originals (invoice slips, etc.;
2
35 to 50 g/m or less).
• You may move an image to the front or the rear in sub scanning
direction by specifying a distance so as to create a margin on the
left/right of the output.
• The binding width may be adjusted between 1 and 20 mm in 1mm
increments.
• You may select cover only, back only, or both cover and back.
You can select an area in a specific image for special processing.
The X coordinate must be 432 mm or less and Y, 297 mm or less.
You can emphasize or subdue images.
You may select one from nine different degrees.
Select 'hard' for crisp characters and lines or 'soft' for photos.
You can select from among the following four types of frame erasing:
q Original Frame Erase
2.5mm
2.5mm
Original
2.5mm
2.5mm
e Book Frame Erase
2.5mm
2.5mm
2.5mm
10mm
2.5mm
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description
w Sheet Frame Erase
7mm
Copy
7mm
r Binding Erase
1~20mm
7mm
7mm