4. MECHANICAL SYSTEM
5) Disconnect the seven connectors t.
6) Remove the registration roller clutch y.
7) Remove the four screws i, and remove the
pick-up drive unit.
8
6
8
5
5
Figure 4-318
4–16
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
5
7
8
5
8
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. Vertical Path Assembly
1) Remove the following:
• Pick-up unit (p. 4-18)
• Pick-up drive unit (p. 4-15)
2) Remove the two rolls, and disconnect the con-
nector; then, remove the multifeeder assem-
bly.
3) Remove the two screws q from behind the
machine.
Figure 4-319
4) Release the feeding lever, and remove the
three screws to remove the feeding lever and
the feeding assembly locking assembly.
5) Remove the screw w, grounding screw e,
and E-ring r.
2
Figure 4-320
1
3
4