Canon GP200 Service Manual page 352

4. MECHANICAL SYSTEM
3. Installing and Positioning the Paper Deflecting Plate 1 Solenoid (SL5)
1) Remove the delivery assembly.
2) Place the delivery assembly upright on a level surface (desk).
3) Push in the steel core of the paper deflecting plate 1 solenoid (SL5) until it stops.
4) Loosen the adjusting screw to adjust so that the gap between the steel core E-ring and the solenoid
frame is about 0.2 mm.
5) Install the delivery assembly to end the adjustment.
0.2mm
Paper deflecting plate 1 solenoid
Figure 4-426
4–26
COPYRIGHT © 1996 CANON INC. CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Download service manual and resetter printer at http://printer1.blogspot.com