KYMCO SUPER8 50 2T Service Manual page 70

6
. CYLINDER HEAD/CYLINDER/PISTON SUPER8 50 2T
Cylinder Gasket
Install a new cylinder gasket on the mating
surface between the cylinder and
crankcase.
Ring Pins
Make sure that the ring end gaps are
aligned with the piston ring pins in the ring
grooves.
Lubricate the cylinder inside and piston
rings with engine oil and install the piston
into the cylinder while compressing the
piston rings.
＊
Be careful not to damage the piston.
Install the cylinder head.
Torque: 1.5～1.7kg-m
Install the exhaust muffler and tighten the
exhaust muffler joint lock nuts.
Torque: 1.8～2.2kg-m
Tighten the exhaust muffler lock bolts.
Torque: 3.0～3.6kg-m
Install the frame covers.
Install the met-in box.
The installation sequence is the reverse of
removal.
6-10