Clutch/Driven Pulley Inspection - KYMCO SUPER8 50 2T Service Manual

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
Remove the seal collar.
Pull out the guide roller pins from the driven
pulley and then remove the O-rings and oil
seal from the driven pulley.
CLUTCH/DRIVEN PULLEY
INSPECTION
Inspect the clutch outer for wear or
damage.
Measure the clutch outer I.D.
Service Limit:
107.5mm replace if below
8-13
Seal Collar
Driven Pulley
O-rings
SUPER8 50 2T
Oil Seal
Guide Roller Pin