Fuel Gauge Inspection - KYMCO SUPER8 50 2T Service Manual

16
. INSTRUMENT/SWITCHES/LIGHTS
FUEL UNIT
＊
No Smoking!
REMOVAL
Remove the seat. (2-4)
Remove the body cover. (2-5)
Disconnect the fuel unit wire connectors.
＊
Do not damage the fuel unit wire.
Remove the fuel unit.
＊
Be careful not to bend or damage the
fuel unit float arm.
INSPECTION
Remove the fuel unit.
Measure the resistance between the fuel
unit wire terminals with the float at upper
and lower positions.
RESISTANCES
Wire Terminals
G～Y/W

FUEL GAUGE INSPECTION

Connect the fuel unit wire connectors and
turn the ignition switch "ON".
＊
Before performing the following test,
operate the turn signals to determine
that the battery circuit is normal.
Check the fuel gauge needle for correct
indication by moving the fuel unit float up
and down.
Float Position
Upper
Lower
Unit: Ω
Upper Lower
20～40 560～580
Needle Position
"F" (Full)
"E" (Empty)
SUPER8 50 2T
Fuel Unit
Fuel Unit Wire
16-2