Clutch/Driven Pulley Assembly - KYMCO SUPER8 50 2T Service Manual

8
. KICK STARTER/DRIVE PULLEY/
SUPER8 50 2T
CLUTCH/DRIVEN PULLEY
Bearing Driver Pilot
Drive in a new needle bearing into the
driven face with the mark facing up.
Outer Driver, 24x26mm
Oil Seal
Driven Pulley

CLUTCH/DRIVEN PULLEY ASSEMBLY

First install the movable driven face onto
the driven face. Then, install the guide
roller pins, O-rings and a new oil seal.
O-rings
Guide Roller Pin
Install the seal collar.
Seal Collar
8-16