Symbols; Safety Requirements - Stiga SBL 260 H Operator's Manual

IDENTIFICATION OF THE COMPONENTS - SYMBOLS - SAFETY REQUIREMENTS
IDENTIFICATION PLATE (10)
10.1) Conformity mark according to directive 2006/42/EC
10.2) Name and address of the manufacturer
10.3) Acoustic output level LWA in accordance with
directive 2000/14/EC.
10.4) Manufacturer's model of reference
10.5) Machine model
10.6) Serial number
10.7) Year of manufacture
10.8) Article code
10.9) Emission number

2. SYMBOLS

1
1) Warning! Danger. The failure to use this ma-
chine correctly can be hazardous for oneself and
others.
2) Read the instruction manual before using the
machine.
3) If you are using the machine every day in nor-
EXPLANATORY SYMBOLS ON THE MACHINE (if present)
11
12
a
b
13
a

3. SAFETY REQUIREMENTS

A) TRAINING
1) Read the instructions carefully. Become
acquainted with the controls and the proper use
of the machine. Learn how to stop the engine
quickly.
2) Only use the machine for the purpose for
which it was designed, namely
– the movement and accumulation, by blow-
ing, of leaves, grass, debris of various limited
2
11) Fuel tank
12) Engine stop switch positions
a = stop
b = run
13) Choke
a = CHOKE = cold engine start
b = RUN = normal gear and warm engine start
b
3
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear earplugs and a
protective helmet.
4) Danger of dismemberment! Never use the
machine with the grille open.
5) Warning! Keep away from hot surfaces.
weight and modest dimensions.
– Vacuum collection of leaves, grass, various
debris of limited weight and modest dimen-
sions, excluding liquids of any kind.
The machine must not be used for accumula-
tion and collection of inflammable or explosive
products, hot embers or combustion material
without a flame, lit cigarettes, pieces of glass,
sharp objects, metal objects, stones and any o-
ther object that could be dangerous to the o-
10.1 10.5 10.2
10.7 10.6 10.9
4
3
EN
10.4 10.3
L
WA
dB
10.8
5