Toshiba Strata DK14 Programming Manual page 184

System & Station
Program 59 – Attendant Console Flexible Button Codes
Table 3-6 Additional Feature Button Codes (continued)
Button Function
Call Pickup (Group)4
Do Not Disturb
ISDN Sub-address
ISDN Start
LCD Message Select
Night Transfer Lock
Tenant 1~Night Transfer
Lock Tenant 4
Release and Answer
Save Last Dialed Number
Station Speed Dial Codes
System Speed Dial Codes
Tone
Notes
See Program *15 for Tenant Group assignments.
Picks up calls to telephones in any call pickup group to which the telephone is assigned in
Program *31.
Attendant consoles cannot be equipped with [SDNs] or [PhDNs]. The console [DN] is
assigned to the console port number in Program 04. The console's [DN] can have only one
appearance.
Attendant consoles cannot be equipped with [PDNs], [SDNs], or [PhDNs]. The [In-DN]
button is the console's [DN], assigned in Program 04; it supports incoming calls only and can
only appear once on a console.
3-138
Button Labels
Group Pickup
Do Not Disturb or DND
Sub-address
Start
LCD Msg Select or LCD M
Night Lock1 or NT1 L1~Night
Lock4 or NT4 L4
Release and Ans and RLS/ANS
Save Last Number or SAVE
SD
SD
Tone Dial Select or TONE
Code
Picks up a call to any group to which
480
station is assigned in *31.
498 Prevents calls to station.
Separates the called party's ISDN sub-
address from the called party number.
467
The digit performs this function on
Æ
standard telephones.
Initiates DK to send dialed digits to the
ISDN network when this button is
pressed from a digital or electronic
469 telephone. Program *63-2 invokes the
same function when the Dial Timer
expires. Also see Tone Button in this
table.
481 Begins LCD message selection.
Used to lock system ringing mode: DAY,
431~434 DAY2, NIGHT See Programs 74 and *36
for NT Lock Password assignments.
Simulates On-hook/Off-hook operation
466 to release an existing call and answer
new incoming/ringing call.
Saves last number dialed for future
485
speed dial.
Reserves button for station speed dial
for the following processors:
*10~*49 RCTUBA/BB
*10~*49 RCTUC/D
*100~*139 RCTUE/F
Speed dial number is set by station port
000.
*600~*699 RCTUBA/BB
*600~*699 RCTUC/D
*200~*999 RCTUE/F
CO dial signals set to tone or pulse.
For ISDN applications, after the user
490
presses the Tone Dial Select button, any
digits dialed after it is will be sent using
DTMF tones.
Strata DK Programming 5/99
Notes