Call Forward/Park Orbits/Transfer; Conference Calls - Toshiba DP5000 Series Quick Reference Manual

Call Forward - Any Calls (Internal & External)
Enter the button sequence below
All Calls: Press Ext. + #6011 + Destination Number
Busy: Press Ext. + #6021 + Destination Number
No Answer: Press Ext. + #6031 + Destination Number + Timer
(seconds, 2-digits) + #
Busy No Answer: Press Ext. + #6041 + Destination Number +
Timer (seconds, 2-digits) + #
Cancel: Press Ext. + #6051
Call Park Orbits
To park a call
1. While on a call, press Call Park.
2. Specify the Park Orbit using one of the following:
• Press * and the system automatically selects a General Park Orbit
between 7000~7019. The chosen orbit appears on the LCD.
• Enter a valid extension.
• Press # and the system automatically selects your extension as
the orbit.
3. Hang up. If the parked call is not retrieved, the call rings back to
your phone.
To retrieve a parked call
1. Press Call Park.
2. Enter the Orbit Number where the call is parked.
Call Transfer
Simple Transfer
1. While on a call, press TRNS soft key.
2. Dial the extension number and the call is transferred.
If your telephone doesn't have a display, or if you would like to
announce the call
1. While on a call, press
2. Dial the extension number. (Optional: Stay on the line to announce
the call).
3. Hang Up.
Note During call transfer you can reconnect to the original
caller by pressing your flashing extension button.

Conference Calls

1. While on a call, press
2. Call another station or outside line.
3. When the called party answers, press
conferenced.
Note If you receive a busy tone or if the station does not answer,
press the flashing line button to return to the original call.
4. Repeat Steps 1~3 to add more lines. You can conference up to
eight parties.
To transfer conference control
Note When the person who initiates the conference (master) hangs
up, control transfers to the first internal station added to the
conference. If no internal stations are in the conference, the call
disconnects.
1. Perform Steps 1 and 2 above to add the line to which you wish to
transfer conference control.
2. Announce the call and hang up to transfer the call. This station is
now the conference "master" with the ability to add or delete
parties.
.
.
. All parties are