Program *17 - Did Intercept Port Number (Vacant Or Wrong Number) - Toshiba Strata DK14 Programming Manual

Program *17 – DID Intercept Port Number (Vacant or
Wrong Number)
Processor Type:
Program Type:
Initialized Default:
ÃÆ ÃÆ Ã! Ã"  Tƒx…
SELECT = DID Line Number
Intercept does not apply to Tie line calls.
To add a port range, enter XXX
Processor Type DID Line Range
DK14 N/A
DK40i 001~012
RCTUA, RCTUB 001~016
Intercept Port
DID LIne Number
Number
Program *17 Overview
DID and/or DNIS calls in which callers have dialed a vacant or invalid port can be routed to
intercept ports assigned with this program. Each DID and/or DNIS line can have its own intercept
port. In all cases, Intercept does not apply to Tie lines.
Strata DK Programming 5/99
Program *17 – DID Intercept Port Number (Vacant or Wrong Number)
DK40i, All RCTUs
System
No data
à & C‚yq  Tƒx…
XXX (low port high port).
Intercept Port Range
N/A
000~027
000~031
DID LIne Number
Æ C‚yq  Tƒx… Æ Æ C‚yq
HUNT TO = Enter Intercept Station
Logical Port No.
LED Button 01 enters blanks.
Processor Type DID Line Range
RCTUBA/BB 001~048
RCTUC/D 001~144
RCTUE/F 001~200
Intercept Port
DID LIne Number
Number
System & Station
 Tƒx… Æ Æ C‚yq
Intercept Port Range
000~079
000~239
000~335
Intercept Port
Number
3-53