Program 60-1 - Smdr Data Output Options - Toshiba Strata DK14 Programming Manual

Program 60-1 – SMDR Data Output Options
Processor Type:
Program Type:
Initialized Default:
ÃÆ ÃÆ Ã! Ã"  Tƒx… %  C‚yq
LED/Button X
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
Caller ID, ANI and DNIS data will be sent from the system
01
SMDR port
Program 60-1 Overview
Program 60-1 determines which information will be sent out the system SMDR port: System
Account codes or Caller ID and/or ANI telephone numbers.
Turn LED 01 ON if received Caller ID and/or ANI information should be sent out the system
SMDR port.
Turn LED 01 OFF if Account Code information should be sent out the system SMDR port.
Note LED 01 determines if received Caller ID and/or ANI information (LED 01 ON) or data is
sent out the SMDR port. This data is output on the last 15-digit (right hand) field columns
of the SMDR print out.
Strata DK Programming 5/99
DK14, DK40i, All RCTUs
System
LED 01 OFF
 Tƒx… C‚yq
SELECT = 1 Light the LED Buttons that are marked
with an X in the table below.
LED ON
Program 60-1 – SMDR Data Output Options
 Tƒx… Æ Æ C‚yq  Tƒx… Æ Æ C‚yq
LED OFF
Account code data will be sent from the system SMDR
port
System & Station
3-139