Toshiba Strata DK14 Programming Manual page 40

Hide thumbs Also See for Strata DK14:
Table of Contents

Advertisement

Initialization & Test
Program 92 – Initializing Misc. Backup RAM
Program 92-9 does not affect Call Forward External or Fixed Call Forward settings.
You must power the system OFF then back ON to clear telephone LCD Call Forward Displays
and Call Forward button LEDs. Call Forward memory is cleared when you run Program 92-9,
even if system power is not cycled.
Program 92 Example
Action (press buttons + LED Buttons)
1.
Use the programming LCD electronic or digital telephone. (See
1: Check Minimum Hardware Requirements" on Page


2.
Enter programming mode. (Do not press [DN] button.) System beeps
6SNU 6SHDNHU
after
be entered.
6SNU 6SHDNHU  +ROG
3.
Access Program 92.
6SNU 6SHDNHU
4.
Prepare the system for selection of programs to initialize. For new
system installation perform all 1~4.
Select one of the following.
5.

+ LED Buttons 01 & 03
Clears Station Speed Dial, Voice Mail ID codes, and LCD memos
assigned to station speed dial numbers.
or...

+ LED Buttons 01 & 04
Clears System Speed Dial and LCD memos assigned to system
speed dial numbers.
or...

+ LED Buttons 02 & 03
Clears Character Message Memory (station and system) and user
name display.
or...

+ LED Buttons 02 & 04
Clears timed reminders.
or...

+ LED Buttons 01 & 05
Presets the Ring, Speaker, Mute Ring, and Intercom Tone, BGM,
volume levels of all digital telephones to approximately mid-range.
or...

+ LED Buttons 03 & 04
Clears Call Forward and Message Waiting (R3) Memory except Fixed
Call Forward Memory.
+ROG
6.
LEDs lit in Step 5 turn off to secure data in system programming.
Repeat Steps 4~6 until Step is completed.
1. N-N is the Program Telephone [DN].
2-10

is pressed to indicate program number may
"Step
1-14.)
Jan 20 Sun
Program Mode
Program = 92
92 Select =
92 Select = 1
Each Dial Clr
92 Select = 2
Common Dial Clr
92 Select = 3
Msg Clr
92 Select = 4
Tmr Reminder Clr
92 Select = 5
DKT VR Initial
92 Select = 9
Back Up RAM Clr
92 Select = (1~0)
Data Programmed
LCD Response
1
No. N-N
06:43
Data Store
Strata DK Programming 5/99

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata dk40iStrata dk424

Table of Contents