Program *41 For Dk424 - T1 Assignment Series (Part 1) - Toshiba Strata DK14 Programming Manual

System & Station
Program *41 for DK424 – T1 Assignment Series (Part 1)
Program *41 for DK424 – T1 Assignment Series (Part 1)
Processor Type:
Program Type:
Initialized Default:
Series Overview
Use Program 41 (Part 1) and 42 (Part 2) series to set T1 parameters and assignments on the
DK424. See the Strata DK Configuration and T1 sections for additional T1 information. RCTU
support is as follows:
Program *41-1 – T1 Span (RDTU) Frame and Line Code Assignments
Initialized Default:
ÃÆ Æ !
Extended Superframe
T1 Span
1 RDTU
2 RDTU
3 RDTU
4 RDTU
5 RDTU
6 RDTU
7 RDTU
8 RDTU
Program *41-1 Overview
T1 Span Framing Assignments: Each RDTU PCB can be individually assigned for Superframe
(LED 01 OFF) or Extended Superframe (LED 01 ON).
T1 Span Line Code Assignments: Each RDTU PCB can be individually assigned for B8ZS
(LED 02 ON) or AMI coding (LED 02 OFF).
3-122
RCTUBA/BB, RCTUC/D and RCTUE/F
System
See each program
Processor
RCTUBA/BB
RCTUC/D
RCTUE/F
LED 01 and LED 02 OFF for all T1 span lines
"  Tƒx… # C‚yq  Tƒx…
SELECT = 1
Select the RDTU being
programmed (1~8)
LED 01 ON
Number of RDTU's Supported
2
6
8
C‚yq  Tƒx… Æ Æ C‚yq
LEDs 01 and 02
Set as described below.
Superframe B8ZS
LED 01 OFF LED 02 ON
 Tƒx… Æ Æ C‚yq
AMI Code
LED 02 OFF
Strata DK Programming 5/99