Program *10 - Enhanced 911 Operation - Toshiba Strata DK14 Programming Manual

Program *10 – Enhanced 911 Operation
Processor Type:
Program Type:
Initialized Default:
Program *10 provides two QSTU2, RSTU, KSTU2, RDSU, PSTU, or PESU ports to be assigned
to interface with central office E911 trunks.
E911 enhanced operation provides locator information to the responding agency to provide more
complete name and address information, including building, floor, etc. This is done by sending the
station number of the 911 caller to the E911 emergency center. This locator information is then
cross referenced with name/number/address data in the E911 central database, and the E911
operator receives the precise location along with the basic information.
The Strata DK14, DK40i and DK424 accomplishes this through a special interface between the
KSU and the CO. This special interface takes the station number information and sends it through
the public network in a format compatible with the central E911 database. This special interface is
required in addition to sending software within the Strata DK.
The required interface is an external device (Telident or Proctor) that interfaces to up to two
standard analog station ports.
Strata DK
Tip/Ring E911 CKT #1
KSTU2
QSTU2
Tip/Ring E911 CKT #2
RSTU
RDSU
PESU
E911 CKT 1 and 2 assigned in Program
Figure 3-1 Physical Connection of E911 Interface
Programs *10-11 and *10-12 – E911 Standard Telephone Ports Assignment
Initialized Default:
ÃÆ ÃÆ Ã! Ã"  Tƒx…
Strata DK Programming 5/99
DK14, DK40i, all RCTUs
System
See each program
Proctor or
Telident
E911 Interface
10
*
Blank
à  C‚yq  Tƒx…
First E911 Port = 11
E911 Port = 12
Second
E911 RSTU/KSTU2/QSTU2 Port Number
First Standard Port
Second Standard Port
Program *10 – Enhanced 911 Operation
CAMA Trunk #1
CAMA Trunk #2
C‚yq  Tƒx… Æ Æ C‚yq
E911 RSTU/KSTU2 Port Number
System & Station
Central
Office
E911
Center
1687
 Tƒx… Æ Æ C‚yq
3-39