Toshiba Strata DK14 Programming Manual page 159

Feature Button Codes for Digital, Electronic, and Strata AirLink Wireless Telephones (continued)
Table 3-1
Button Function
Call Forward A.C. Fixed Call Frwd to: or CFF
Call Forward Busy Call Frwd Busy or CFB
Call Forward Busy/No Call Frwd Busy/NAns or CFB/
Answer NA
Call Forward External Call Frwd External or CF-EXT
Call Forward No Answer Call Frwd No Answer or CFNA
2
Call Park Park in Orbit or PARK (R3)
Park Orbit DIsplay or CPD
1
Call Park LCD Display
(R3)
Call Park and Page Call Park/Page or CP/PG (R3)
Call Pickup (Directed) Directed Pickup or PKUP
3
Call Pickup Tenant 4 PKUP 4
3
Call Pickup Tenant 3 PKUP 3
3
Call Pickup Tenant 2 PKUP 2
3
Call Pickup Tenant 1 PKUP 1
2
Call Pickup (Group) Group Pickup
Unanswered Caller ID and/
Lost Call Auto Dial (R3) or
or ANI Stored Number Auto
LCAD
1
Dial
Line 1~200 or CO 001~CO
CO Line Appearance
200
1
Data Data Call or DATA
1
Data Release Data Release or DRLS
Direct Station Selection DSS
Directory Numbers (see following pages)
4
Do Not Disturb Do Not Disturb or DND
Unlock Door 0 or DRLK 0
Unlock Door 1 or DRLK 1
Door Lock 0 ~4 (DDCB/
Unlock Door 2 or DRLK 2
1
HDCB)
Unlock Door 3 or DRLK 3
Unlock Door 4 or DRLK 4
Handset Off-Hook Call
HS-OCA
1
Announce
ISDN Sub-address Sub-address
ISDN Start Start
LCD Message Select LCD Msg Select or LCD M
Message Waiting and Flash Msg Wait, Flash or MW/FL
5
Microphone Cutoff Microphn Cut-off or MCO
1
Modem Modem or MODEM
3
Night Transfer Tenant 1 Night Transfer1 or NT1
3
Night Transfer Tenant 2 Night Transfer2 or NT2
3
Night Transfer Tenant 3 Night Transfer3 or NT3
3
Night Transfer Tenant 4 Night Transfer4 or NT4
Night Transfer Lock Tenant 1 Night Lock1 or NT1 L1
Night Transfer Lock Tenant 2 Night Lock2 or NT2 L2
Night Transfer Lock Tenant 3 Night Lock3 or NT3 L3
Night Transfer Lock Tenant 4 Night Lock4 or NT4 L4
1
Pause Spd Dial Pause or PAU
1
Pause (Long) Spd Dial Lng Pause or PAU/L
Pooled Line Pooled Line Grp or PL
Privacy Privacy On Line or PRIV
Privacy Release Privacy Release or PRV RLS
Strata DK Programming 5/99
Button Labels Code
486
459
457
460
458
464
465
463
484
435
436
437
438
480
462
001~
200
456
454
#000~
#239
498
471
472
473
474
475
468
467
469
481
499
488
455
439
440
441
442
431
432
433
434
495
493
301~
316
453
479
Program 39 – Flexible Button Assignments
Notes
Forwards all calls to pre-defined destination. See Program 36.
Forwards calls to selected station if station is busy.
Forwards calls to selected station if station is busy or does not
answer.
Forward calls externally.
Forwards calls to selected station if station does not answer.
Call Park Only.
CP Display Button and Mode 64 can be used interchangeably.
Displays call parked via telephone LCD.
Parking and Paging Park Pickup.
Picks up ringing or held intercom, trunk calls, and page.
Picks up tenant's ringing CO calls.
See Program 15 for Tenant Group assignments.
*
Picks up a call to any group to which station is assigned in
Will Auto Dial a Caller ID and/or Automatic Number Identification
(ANI) telephone number that was stored in station Caller ID/ANI
memory.
CO line access of appearing calls.
Used to place data call.
Releases data call.
Assigns DSS hotline keys to port number.
Prevents calls to station.
Momentarily unlocks door (3 or 6 seconds).
See Program 77-1 and 77-2.
Activates 2-way voice path to Off-Hook Call Announce caller. (R3)
Separates the called party's ISDN sub-address from the called
party number. The digit performs this function on standard
Æ
telephones.
Initiates DK to send dialed digits to the ISDN network when this
button is pressed from a digital or electronic telephone. Program
*63-2 invokes the same function when the Dial Timer expires. Also
see Tone Button in this table.
Begins LCD message selection.
Provides message waiting LED for EKT and Flash Button.
Sets microphone ON/OFF for incoming handsfree Directory
Number [DN] calls.
Used to reserve modem in modem pool.
Sets Tenant CO line DAY/NIGHT ring mode.
Available with RCTUA3, RCTUBA3/RCTUBB3 or RCTUC/D3
Release 3 or above only.
Used to lock system ringing mode: DAY, DAY2, NIGHT See
Programs 74 and 36 for NT Lock Password assignments.
*
Sets pause in Speed dial See Program 12-3.
Sets a 10-second pause in Speed Dial.
Multiple CO line may appear under one button.
Prevents Privacy Override (not Executive Override).
Changes station Privacy mode to Non-private for CO lines.
System & Station
31.
*
3-113