Program 17 - Did/Tie Line Options - Toshiba Strata DK14 Programming Manual

Hide thumbs Also See for Strata DK14:
Table of Contents

Advertisement

System & Station
Program 17 – DID/Tie Line Options
Program 17 – DID/Tie Line Options
Processor Type:
Program Type:
Initialized Default:
ÃÆ
ÃÆ
Ã!
Ã" 
Enter Line No. that will be DID or Tie line.
To add a port range, enter XXX
Line Numbers:
LED/Button
X
09, 10, and
14~20
08
07
06
05
04
03
02
01
Program 17 Overview
Program 17 assigns lines for Tie and DID operation.
Important!
Notes
Each REMU, PEMU, RDDU or TDDU PCB reduces the station port capacity by four station
ports, each RDTU Tie/DID line channel reduces the system's station port capacity by one port.
Always install Tie or DID line PCBs in slot numbers that are higher than station PCB slot
numbers (see Chapter 2 – DK40i Configuration in the Strata DK Installation and Maintenance
Manual).
Incoming Tie line calls camp-on only if Program 71 assignments are used.
Copy one record sheet for each group of Tie/DID lines that have different Program 17
parameters.
LEDs 09, 10 and 14~20
Not used at this time.
3-50
DK40i, All RCTUs
System
LED 01/02 OFF, LED 03/04 ON
Tƒx…
& C‚yq

Tƒx…
XXX (low port
LED ON
Not used at this time.
DID/Tie line DTMF digits with
tones
DID/Tie line receives ANI and routes per Programs 71 and 72
Telephone LCD priority is ANI
DID/Tie line routes per DNIS assignments:
(Programs 71 and 72)
DID/Tie no second dial tone
DID line Auto Camp-on busy
Wink Start for Tie or DID
Page and Voice Announce on incoming Tie line Page access for
Tie/DID DNIS lines
When normal Tie/DID lines are configured with Program 71 and 72 DNIS
assignments, turn LED 05 ON and LED 06, 07 and 08 OFF for those lines - then
program the lines as required in Programs 71 and 72.
Æ
C‚yq

Tƒx… Æ Æ C‚yq
Light LED Buttons 01~08 as noted in table below
high
DID/Tie line DTMF digits without
DID/Tie line does not receives ANI (DID Program *09 and
Tie Program 04)
Telephone LCD priority is DNIS
DID/Tie line routes per Non-DNIS assignments:
(DID Program *09 and Tie Program 04)
DID/Tie second dial tone
DID line no Camp-on busy
Immediate Start for Tie or DID
No Page and Voice Announce on incoming Tie line No
Page access for Tie/DID DNIS lines

Tƒx… Æ Æ C‚yq
LED OFF
tones
Strata DK Programming 5/99

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata dk40iStrata dk424

Table of Contents