Toshiba Strata DK14 Programming Manual page 44

Initialization & Test
Program 00 – Part 1: Software Check
Action (press buttons + LED Buttons)
1111
Define the Level 1 remote maintenance security code from the System
Record Sheet (four digits maximum). Level 1 allows remote access to
all programs and data. Default Level 1 security code is "0000."
or...
1111
Define the Level 2 remote maintenance security code from the System
Record Sheet (four digits maximum). Level 2 allows remote access to
programs 30~39 and 77~89 only. Default Level 2 security code is
"0000."
or...

View the software RAM Checksum. This attribute can not be edited.
The default checksum may change.
or...
View the RPSU Power Cycle Counter. This attribute can not be edited.
The counter indicates the number of times power is removed from the
system after Program 00 was initialized via Program 90 or 91-9.
+ROG
6.
Secure data in system programming. (Only works for "1" and "2")
6SNU 6SHDNHU
7.
Prepare system for another selection (go back to Step 5) or exit
Program 00 (continue with Step 8).
+ROG
8.
Secure Program 00 data in system memory.
6SNU 6SHDNHU
9.
Exit Program 00. Enter another program number (see
Example" on Page
System beeps to indicate it is exiting Program 00.
+ROG
10.
Exit programming mode.
1. N-N is the Program Telephone [DN].
2-14
2-7) or exit programming mode (go to Step 10).
00 Select = 1
Password = 0000
00 Select = 2
Password = 0000
00 Select = 8
Sum = XXXXXXXXX
00 Select = 9
Counter = XXXX
00 Select = (0,1,2,8, or 9)
Data Programmed
00 Select =
00 Select = ##
Data Programmed
Program =
"Program 91-1
Jan 20 Sun
LCD Response
No. N-N
06:58
Strata DK Programming 5/99