Assembly Step - Horizon Fitness andes 3 Assembly Manual

aSSEMBLY STEP 1

aSSEMBLY STEP 1
ANDES 3
SHOWN
6
7
1
B
M
A
a remove the 4 PRE-INSTALLED WASHERS (A) , 4
SPRING WASHERS (M) and SCREWS (B) from the
MAIN FRAME (2).
B carefully pull CONSOLE CABLE from the
CONSOLE MAST (1) then attach to another
CONSOLE CALBE on the MAIN FRAME (2).
L
c attach CONSOLE MAST (1) to MAIN FRAME
(2) using 4 PRE-INSTALLED WASHERS (A) , 4
SPRING WASHERS (M) and SCREWS (B).
D remove the 2 PRE-INSTALLED SCREW (L) from
the CONSOLE MAST (1). (Only andes 3)
E attached BOTTLE HOLDER (7) to cONSOLE
MaSt (1) using 2 PrE-INStaLLED ScrEW (L).
2
(Only andes 3)