Advertisement
A S S E M B L Y
I N S T R U C T I O N S
FRONT FOOT ASSEMBLY
STEP 1 Gently push the Front Foot (J01) through the Foot Bracket
and align the holes on Foot Bracket with the holes in the Fo o t .
STEP 2 Tighten the Front Foot (J01) using two Bolt (J03).
STEP 3 Press Foot End Cap (J02) to both ends of the Front Foot (J01).
PEDAL ASSEMBLY
STEP 1 Attach the Pedal Bracket (T01) to the Seat Rail (F01) using
four Bolts (T13) and Washers (T14).
STEP 2 Slide the Pedal Rod (T04) through the Pedal Bracket (T01).
STEP 3 Slide the Left and Right Pedal (T06) onto the Pedal Rod
(T04) and fix them using two Washers (T12) and Nylon Nuts (T11).
7
REAR FOOT AND SEAT ASSEMBLY
STEP 1 Slide the Seat Assembly (AD1) onto the Seat Rail (F01).
STEP 2 Attach the Seat Stop Bumper (F05) to the Seat Rail (F01) using two
STEP 3 Place the Rear Foot Position Plate (F04) in the Seat Rail (F01) close
STEP 4 Press the Rail End Cap (F02) to the Seat Rail (F01).
RAIL AND WIRES ASSEMBLY
STEP 1 Connect Sensor (P01) and Heart rate Sensor wire with the connection Cable
STEP 2 Place the Seat Rail (F01) into the Rail Bracket (B12). Slide the Seat Rail Rod (F14)
OXFORD II
OXFORD II
Bolts (F07) and Wa s h e r s ( F 1 7 ) .
to the edge. Attach the Rear Foot (H03) to the Seat Rail (F01) and
align the four holes in the Seat Rail (F01) with the four holes in the
frame lip. Thread four Bolts (H04) with Spring Washers (T14)
through the frame lip into the Rear Foot Position Plate (F04) and
tighten them.
(P03) . Be cautions with Lable instructions.
with the Washer (F06) through the holes in the Rail Bracket (B12) and tighten
them using Nylon Nut (F08) and Washer (F06).
8
Advertisement
