Muratec F-100 Operating Instructions Manual page 94

What you see on the
LCD
Enter No.(0-32)
Enter No.(1-99)
No Document Stored
No Command
Invalid I.D. Code
Memory Overflow
All Commands In Use
Check # of Pages
Please Supply Toner
Please Replace Drum
What it means/What to do
You tried to enter a call group number greater
than 32. Your machine can maintain 32 call
groups, numbered 1–32 (call group 0 covers all
the groups). Determine the correct call group
and re-enter its identifier number.
You tried to request "0" copies from your fax,
which can create 1–99 copies of a document.
Select the correct quantity and re-enter it.
You tried to print a document from memory, but
your fax machine had none stored.
You pressed to review upcom-
REVIEW COMMANDS
ing commands, but your fax machine had none
stored.
The SecureMail passcode you entered isn't
valid. Try re-entering your SecureMail passcode.
During transmission (or copying), you tried to enter
more pages into memory than your fax could store.
Press (or ) to tell your fax to keep as many
START COPY
pages in memory as possible, or press
delete from memory all pages stored during this
operation (but not previous operations).
Your fax machine has all of its 99 possible
delayed commands (an automatic redialing
counts as one) stored in memory and cannot
accept another. Delete an existing command by
using , or wait until your fax
REVIEW COMMANDS
has completed one of the delayed commands.
You placed fewer pages into the document
feeder than you indicated in your page-number-
ing user setting (see page 2.35). Carefully
recount the pages in your document, then re-try
the transmission, being sure to enter the correct
number of pages if you use the page-numbering
function.
The toner cartridge is empty. Replace it.
Your drum cartridge no longer functions. Please
replace it, being sure to reset the drum counter
when you do so (see page 1.7).
to
CANCEL
Just in case ...
3.7