Table of Contents
Advertisement
Beyond the basics
Dialing from the numeric keypad while using the
Note: If the
mask feature is off, you dial normally.
PIN
If you've specified Mode 1 — use "star" power
1
Enter the phone number, then press the * ("star") key and enter the
The
always goes last. For example, to dial 19725550911 with a
PIN
"123456", enter 19725550911*123456:
Press Start
19725550911*123456
2
Press
. The
disappears from the display, and your machine dials the
START
PIN
desired phone number.
If you've specified Mode 2 — the machine guides you
1
Enter the phone number as usual.
Press Start
19725550911_
2
Press
. The
now shows:
START
LCD
Enter PIN Number
_
3
Use the numeric keypad to enter the
Enter PIN Number
123456_
4
Press
. Your machine will dial the number.
START
2.52
mask
PIN
.
PIN
of
PIN
.
PIN
Performing batch transmission while using the
Note: The following instructions presume you are familiar with how to set and use
both your machine's autodialer and its batch transmission feature. If you
need to review, see pages 2.8–2.16 for more on the autodialer and/or pages
2.24–2.27 for more on batch transmission.
Note: If the
mask feature is off, you dial normally.
PIN
If you've specified Mode 1 or Mode 2
Important: Any autodialer number you use with batch transmission must include
the
. (To review how to include this information in an autodialer
PIN
number, review the Mode 1 instructions under "Autodialing while
using the
mask," page 2.50.)
PIN
Before sending a batch transmission to a desired number the first time, you must
store the
within its batch box. Here's how:
PIN
1
Perform the batch box setting until you've entered the batch box number.
The
now asks for the fax number (here, we're working with batch box 1):
LCD
1:Fax Number
_
2
Enter an autodialer number, or use the numeric keypad to enter the fax num-
ber, to which the batch transmission should go.
Important: If you're using an autodialer number, it must contain the
mentioned previously.
If you're entering a number from the numeric keypad, enter the
fax number, followed by the * ("star") key and then the
3
Press
to save the setting.
ENTER
Note: If you press
without entering the
ENTER
indicates "No
Number" on the
PIN
Now you can perform batch transmission to this box while the
mask
PIN
, as
PIN
.
PIN
, the fax machine beeps,
PIN
and then returns you to step 2.
LCD
mask is activated.
PIN
Advertisement
Table of Contents
