Table of Contents
Advertisement
4
The
now asks whether you want to set the calendar/clock for automatic
LCD
recognition of daylight saving time (
Daylight Saving:Off
Program/Enter
When the setting is On, your machine automatically will set itself to
standard time, depending upon the calendar setting, at 2
"switchover" Sundays each year.
When the setting is Off, no such automatic change will occur.
(We have provided this choice because some areas do not observe
If the setting you see is acceptable, skip to step 6.
Otherwise, proceed to step 5.
5
To change the setting, press
or /
appears (here, we've changed the setting to On):
Daylight Saving:On
Program/Enter
6
Press
to save the setting and continue.
ENTER
7
The
now asks you to enter your fax number as you want it to appear on
LCD
other fax machines' displays or printouts. The fax industry term for this num-
ber is Subscriber
.
ID
Your Fax Number
8
Use the numeric keypad to enter the desired number. To put in a dash for
easier reading, as shown here, press
contain up to 20 characters (numbers and dashes).
Your Fax Number
972-555-5525
Note: If you make a mistake, press
to change just one character in the number, press
sor leftward, or /
PROGRAM
Then re-enter until the fax number is just as you want it.
9
Press
to save the number.
ENTER
).
DST
DST
on the appropriate
AM
.)
DST
once or twice until your choice
PROGRAM
once. The number may
DIALING OPTIONS
to erase leftward. Or, if you want
CANCEL
to move the cur-
, to move it rightward, to that character.
10
The
now asks you to enter the name you want it to appear at the top of
LCD
faxes you send. The name may be up to 22 characters in length.
Important: You enter letters and other non-numeric characters through the
one-touch keys.
Your Name
or to
_
The word "Upper" means the machine is currently set for entering only
upper-case letters. If you press
To change it so that pressing a one-touch key will produce a lower-case letter
rather than an upper-case letter, press
Your Name
_
This means pressing one-touch keys will enter lower-case letters: pressing
will produce an r (not an
To switch back for upper-case entries, press
To enter spaces, punctuation and symbols, press
enter the blue characters shown on the one-touch keypad.
In "Beyond the Basics," we'll show you how to use the
4/
to enter a wide variety of characters (see page 2.3). For now, how-
U
CODE
ever, become familiar with the
Note: If you make a mistake, press
to change just one character in the name, press
leftward, or /
Then re-enter until the name is just as you want it.
11
Press
to save the setting and continue.
ENTER
12
The
now indicates the type of dialing, tone or pulse, for which your fax
LCD
machine is set:
Phone Type:
Program/Enter
If the setting you see is acceptable, skip to step 14.
Otherwise, proceed to step 13.
:Upper
, the machine will see it as an
R
2/abc. The display will change to:
U
:Lower
) on the display.
R
1/
.
U
ABC
3/
U
SYMBOL
CODE
, abc and
keys.
ABC
SYMBOL
to erase leftward. Or, if you want
CANCEL
, to move it rightward, to that character.
PROGRAM
Tone
Getting started
(not an r).
R
R
. This lets you
function at
to move the cursor
1.11
Advertisement
Table of Contents
