Muratec F-100 Operating Instructions Manual page 86

4
Press or / once or twice until you see the setting you want.
PROGRAM
Dept. Protect: On
Program/Enter
5
Press to save the setting.
ENTER
Sending a fax using a department code
Note: For this operation to work, two things must be true:
• The four-digit department code must exist on your fax machine.
• You must know the department code.
1
Insert the document.
2
Adjust resolution and contrast if necessary.
3
If you want to toggle between transmission from the feeder or from memory,
press .
MEMORY TRANSMIT
4
Enter the fax number by either pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad.
5
Press .
START
Enter Dept. Code
_
6
Use the numeric keypad to enter the appropriate four-digit department code.
In this example, we've entered 1234:
Enter Dept. Code
1234_
7
Press again.
START
Beyond the basics
2.57