Specifications; Engine Specification; Machine Specification - Ransomes Highway 2130 Safety, Operation & Maintenance Manual

4

SPECIFICATIONS

4.1

ENGINE SPECIFICATION

TYPE: Kubota 25Kw @ 3000rpm, 4
cylinder (in-line) vertical Diesel
engine, 4-stroke, water cooled,
1335cc, with 12v electric start.
Model: V1305-BBS-EC-1
Maximum Speed: 3150 ± 50 RPM (No load)
Idle Speed: 1500 +100 RPM
Oil Sump Capacity: 6 litres
Fuel: No. 2-D Diesel fuel (ASTM D975)
Coolant Capacity: 5 litres 50/50 Anti-freeze
Coolant Specification: Ethylene glycol anti-freeze with
softened water.
en-8
RANSOMES HIGHWAY 2130
SAFETY AND OPERATORS MANUAL
4.2

MACHINE SPECIFICATION

Frame construction: Heavy duty formed steel chassis.
Transmission: Hydrostatic power provided by a
servo-controlled transmission
pump. Driving 2 indivdual wheel
motors with Diff-lock facility.
4WD: Driving 4 individual wheel
motors with a patented parallel
series transmission system.
Selectable forward all wheel drive
lock and reverse front axle diff-
lock facility.
Cutting unit drive: Hydraulic, with forward, neutral,
reverse control valve. Electric
dash mounted switch for on/off
control, with floor mounted switch
for cyclinder engage.Hand
control valve for reel speed
adjustment
Speeds:
Cutting: 12 km/h
Transport: 25 km/h
21 km/h (4WD)
Reverse: 6 km/h (4 mph)
Steering: Hydrostatic powered steering to
rear wheels.
Ground pressure: 1.00 bar (14psi)
Brakes, Service: Positive hydrostatic braking.
Parking: Fail safe, Oil immersed wet disc