Machine-Specific Safety Warnings; Environment; Disposal; Safety Warnings For Jigsaws - Dremel Moto-Saw MS20 Original Instructions Manual

repaired before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.,
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.

MACHINE-SPECIFIC SAFETY WARNINGS

SAFETY WARNINGS FOR JIGSAWS

a. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
b. Keep hands away from the sawing range. Do not
reach under the workpiece. Contact with the saw
blade can lead to injuries.
c. Apply the machine to the workpiece only when
switched on. Otherwise there is danger of kickback
when the cutting tool jams in the workpiece.
d. When the cut is completed, switch off the machine
and then pull the saw blade out of the cut only
after it has come to a standstill. In this manner you
can avoid kickback and can place down the machine
securely.
e. Use only sharp, flawless saw blades. Bent or
unsharp saw blades can break or cause kickback.
f. Do not brake the saw blade to a stop by applying
side pressure after switching off. The saw blade
can be damaged, break or cause kickback.
g. Use suitable detectors to determine if utility lines
are hidden in the work area or call the local utility
company for assistance. Contact with electric lines
can lead to fire and electric shock. Damaging a gas
line can lead to explosion. Penetrating a water line
causes property damage or may cause an electric
shock.
h. Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
i. Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn
or explode.
j. Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
k. Never use the machine with a damaged cable. Do
not touch the damaged cable and pull the mains
plug when the cable is damaged while working.
Damaged cables increase the risk of an electric shock.
SERVICE
GENERAL WORKING STAND SAFETY WARNINGS
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
a. Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments or changing accessories.
Accidental starting of the power tool is a cause of
some accidents.
b. Properly assemble the working stand before
mounting the tool. Proper assembly is important to
prevent risk of collapse.
c. Securely fasten the power tool to the working
stand before use. Power tool shifting on the working
stand can cause loss of control.
d. Place the working stand on a solid, flat and level
surface. When the working stand can shift or rock, the
power tool or workpiece cannot be steadily and safely
controlled.
READ ALL SAFETY WARNINGS AND
WARNING
!
ALL INSTRUCTIONS PROVIDED WITH
THE WORKING STAND AND THE POWER TOOL TO BE
MOUNTED. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
DO NOT WORK WITH MATERIALS
WARNING
!
CONTAINING ASBESTOS (ASBESTOS
IS CONSIDERED CARCINOGENIC).
TAKE PROTECTIVE MEASURES
WARNING
!
WHEN DURING WORK DUST CAN
DEVELOP THAT IS HARMFUL TO ONE'S HEALTH,
COMBUSTIBLE OR EXPLOSIVE (some dusts are
considered carcinogenic); wear a dust mask and work with
dust/ chip extraction when connectable.

ENVIRONMENT

The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
ONLY FOR EUROPEAN COUNTRIES
Do not dispose of power tools into household
waste!
According the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
correct manner.
SPECIFICATIONS
GENERAL SPECIFICATIONS
Dremel Moto-Saw 2-in-1 Compact Scroll Saw MS20
Voltage Rating
Wattage Rating
No Load Speed
12

DISPOSAL

220-240V~50/60Hz
70 W
n 1500-2250 min–1
o