[Ftp] - Konica Minolta bizhub c554 User Manual

Settings
[Reference]
Tips
- To check the settings for a registered destination, select its registered name, then tap [Check Job Set.].
- To change the settings for a registered destination, select its registered name, then tap [Edit].
- To delete a registered destination, select its registered name, then tap [Delete].

[FTP]

To display: [Utility] - [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Address Book
(Public)] - [FTP] - [New]
Register destination FTP server host names or IP addresses.
Settings
[No.]
[Name]
[Sort Character]
[Index]
[Host Address]
[File Path]
[User ID]
[Password]
[anonymous]
[PASV]
[Proxy]
bizhub C554/C454/C364/C284/C224
Description
On the Touch Panel, search for a computer to send a file to, and select a
target shared folder.
When the authentication screen appears, enter the name and password of
a user who has privileges to access the selected folder. After authentica-
tion, [Host Address] or [File Path] is entered automatically.
The Reference function may fail under the following conditions.
• If 512 or more workgroups or computers are on the network (subnet)
connected to this machine, this function may fail.
• This function is not available in the IPv6 environment.
Description
Destination registration number. [No.] is automatically registered using an
unused smaller number. If you want to specify a number, tap [No.] and en-
ter the number within the range of 1 to 2000.
Enter the destination name to be displayed on the Touch Panel (using up
to 24 characters).
Assign a name that helps you easily identify the destination.
Enter the same name as the registered name (using up to 24 characters).
You can sort destinations by registration name.
Select a corresponding character so that the destination can be index-
searched by registration name.
• If an alphabet character is specified for the initial of a registration name,
search text is automatically specified with the alphabet character. If an-
ything other than alphabet character is specified for the initial of a reg-
istration name, [etc] is specified by default.
• For a frequently used destination, also select [Favorites]. If [Favorites]
is selected, the destination will appear in the main screen in fax/scan
mode, enabling the user to easily select a destination.
Enter the host name or IP address of the destination FTP server with up to
63 bytes.
• Host name entry example: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Enter the name of a destination folder in the FTP server specified in [Host
Address] with up to 127 bytes.
• Entry example: "scan"
When not specifying a file path, enter a slash "/".
If authentication is required in the destination FTP server, enter the login-
enabled user name (using up to 64 characters).
Enter the password of the user specified in [User ID].
When authentication is not required for the destination FTP server, press
[ON].
[OFF] is specified by default.
When the PASV mode is used in your environment, press [ON].
[OFF] is specified by default.
When a proxy server is used in your environment, press [ON].
[OFF] is specified by default.
12
12-7