9
9.2
Preparation to send data via a scan server (for the administrator)
9.2.1
Preparation flow
1
Connecting this machine to the network
% Checking a LAN cable for connection
% Checking the network settings
Check that an IP address is assigned to this machine.
2
Prepare the environment required to send data via a scan server
% Enabling the Distributed Scan function
3
Preparation finished
9.2.2
Operations required to use this function
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that
an IP address is displayed.
d
Reference
If no IP address is displayed, you need to set up the network. For details, refer to [User's Guide: Web Man-
agement Tool].
Configuring the environment to send data via a scan server.
Enable the Distributed Scan function.
How to configure the setting is explained using Web Connection. For details, refer to [User's Guide: Web
Management Tool].
9-4
Preparation to send data via a scan server (for the administrator)
bizhub C554/C454/C364/C284/C224
9.2