Konica Minolta Bizhub C364 Installation Manual
Hide thumbs
Also See for Bizhub C364:
- Shortcut manual (33 pages) ,
- Quick assist manual (278 pages) ,
- User manual (272 pages)
Advertisement
Quick Links
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
PC-110
PC-210
AU-102
WT-506
*2
AU-201
DF-701
SP-501
PK-519
FS-533
When installing the machine and associated options as a system, follow the order shown on the upper.
Caution:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main unit installa-
tion.)
• When placing the machine on the floor, make
sure to use the paper feed cabinet or the desk
to secure the performance and the quality of
the product.
• To use this machine, install the dual scan docu-
ment feeder, the reverse automatic document
feeder, or the original cover.
Even if you do not install the original cover, be
sure to install the hinge covers supplied with
the original cover.
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
/
INSTALLATION MANUAL
HT-509
MK-734
PC-410
Machine
Electronic system options
MK-735
*1
AU-201
DF-624
OC-511
JS-506
FS-534
KH-102
/
Applied Machines:
DK-510
DK-705
MK-730
PK-520
SD-511
• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
could result in personal injury. When transport-
ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces-
sively loaded.
(mass: approx. 85 kg (187-3/8 lb))
E-1
/
✱ Electronic system options
*3
EK-606
EK-607
*3
UK-204
*3
SC-508
*3
FK-511
*4
VI-506
*4
IC-414
*1
: When installing the AU-201
with MK-735
*2
: When installing the AU-201
without MK-735
*3
: No particular order in installa-
tion procedures.
*4
: Unable to be installed in
C224.
A161-9601-01
/
*3
A161IXC001DA
Advertisement
Related Manuals for Konica Minolta Bizhub C364
Summary of Contents for Konica Minolta Bizhub C364
- Page 1 INSTALLATION MANUAL Applied Machines: <Important> Be sure to correctly follow the procedures in order as explained in this Installation Manual. If you do not follow the procedure in order, the image trouble may occur. I. Outline of installation procedures HT-509 ✱...
- Page 2 II. Installation space (unit: mm (inch)) III. Pre-installation check items bizhub C364 + DF-701 + PC-210 + FS-534 1. Select a level and stable place for installing the + MK-730 machine. 2. Be sure to use a power source of the voltage and...
- Page 3 V. Accessory parts VI. Removing the machine 1. Unpack and remove the machine package. Name Q’ty 2. Remove the machine, holding it by the locations 1. User’s guide holder on the left side and the handles on the right side 2.
- Page 4 VII. Removing protective tape, packing 2. Open the right door and remove the packaging materials. and other shipping materials Note: 1. Remove the protective tape and the protective After removing the packaging materials, make materials. sure that the transfer roller assy is secured in place.
- Page 5 5. Slide out the tray 1 and remove the protective 9. Remove the protective tape and protective mate- tape from the inside of the tray. rial. Protective material A161IXC008DA Protective tape 6. Slide out the tray 2 and remove the tray locking A161IXC010DC materials.
- Page 6 VIII. Installing the toner cartridge 12. Release the lever of the drum unit (K). Note: Since cartridge is not supplied with the machine, purchase toner cartridge (of different colors) sepa- rately. 1. Shake the toner cartridge up and down and left to right 5 to 10 times respectively.
- Page 7 3. Push the toner cartridge all the way in and rotate 3. Set the stylus pen in the place shown in the illus- it clockwise to lock it. tration. Note: Make sure that the toner cartridge is pushed all the way in.
- Page 8 XIII.Date/Time setting (Administrator set- 2. Fit the supplied cord clamp over the power cord. (One supplied screw B) tings) 1. Select the Date/Time Setting function as follows: Menu → Utility → Administrator Settings → Enter the Administrator Password (Default setting: 1234567812345678) →...
- Page 9 × <If A3 or Ledger paper is set in step 1> 12. Touch “Copy”, select “A3 ”, and × 6. Touch “Print”, select “A3 ”, and press the start key. A test pattern will then be produced on the press the start key. or Ledger paper.
- Page 10 ½×11 <If A4 or Letter paper is set in step 1> 12. Touch “Copy”, select “A4 ”, and press the start key. ½×11 6. Touch “Print”, select “A4 ”, and A test pattern will then be produced on the two press the start key.
- Page 11 XV. Date/Time setting (Service Mode) XIX. List output 1. Make sure that the Service Mode screen is dis- 1. Load the tray 1 with A4 or Letter paper. played. 2. Touch “List Output.” 2. Display the Date & Time Setting screen. 3.
- Page 12 XXI. Affixing the label (Legal restrictions XXIII. Connecting the network cable on copying) 1. Connect the networking equipment (HUB) using the network cable. Affix the label (Legal restrictions on copying) to the position shown below. Note: The following shows the recommended network Note: cables that correspond to each communication This step may not be performed depending on the...
- Page 13 <When adding no paper feed options/desk or when using 4. Remove the knockout from the rear right cover the desk DK-705> removed in step 3 using nippers. 3. Remove the indicated knockout from the machine’s interface cover using nippers. A161IXC057DA 5.
- Page 14 XXIV. Performing Non-Image Area Erase XXV. Network setting Check Make the TCP/IP address setting for the network. Note: Note: Consult the network administrator for the setting Perform the below at the site where customer value to be entered and make settings as uses the machine.
- Page 15 XXVI. Adjusting registration of paper 10. If the measured width A falls outside the speci- fied range, enter the correction value using the source options key. Note: * When the tray 4 is available with the optional Performing this procedure is necessary only when paper feed cabinet, check the tray and make a paper feed option is installed.
- Page 16 XXIX. Fixing the touch panel 4. Install and tighten the screw as shown to fix the touch panel to the operation panel. Note: Note: Perform the steps below only when necessary • Since the back side of the panel has two types (upon your customer’s request).
- Page 17 OC-511 Original Cover INSTALLATION MANUAL I. Accessory parts II. Installation procedures 1. Remove the two knockouts using nippers or a Name Shape Q’ty similar tool. 1. Original cover A161IXC060DA 2. Hinge cover (right) A161IXC031DA 3. Hinge cover (left) A161IXC032DA A161IXC033DA 4.