[Detail Settings] - Konica Minolta bizhub c554 User Manual

Settings
[SSDP Settings]

[Detail Settings]

[IEEE802.1x Authentication
Settings]
[Web Browser Setting]
[Bluetooth Setting]
[Single Sign-On Setting]
[IWS Settings]
[Remote Panel Settings]
[Internet ISW Settings]
[Detail Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings]
Configure the detailed network settings.
Settings
[Device Setting]
[Time Adjustment Setting]
[Status Notification Setting]
[Total Counter Notification
Settings]
[PING Confirmation]
[SLP Setting]
[LPD Setting]
[Prefix/Suffix Setting]
[Error Code Display Set-
ting]
bizhub C554/C454/C364/C284/C224
Description
Select whether to use the SSDP (Simple Service Discovery Protocol). To
use SSDP, change the multicast TTL as necessary.
Configure the detailed network settings.
Select whether to use IEEE802.1x authentication. To use IEEE802.1x au-
thentication, check the authentication status and configure the certification
verification items.
Select whether to enable a Web Browser.
Select whether to enable Bluetooth.
Join this machine to the Active Directory domain, and configure settings to
build the single sing-on environment.
Configure the IWS (Internal Web Server) operating environment.
Configure the settings for remote control of the Control Panel of this ma-
chine from another computer.
Download the firmware of this machine via the Internet, and configure set-
tings to update the firmware.
Description
Check the MAC address of this machine, enable or disable LLTD (Link Lay-
er Topology Discovery), and specify the network speed setting.
For details, refer to [User's Guide: Web Management Tool].
Configure the setting for automatically adjusting the date and time on this
machine the using the NTP (Network Time Protocol) server.
For details, refer to [User's Guide: Web Management Tool].
Configure the setting for notifying to the registered E-mail address when a
warning such as for toner replacement or a paper jam occurs on this ma-
chine.
For details, refer to [User's Guide: Web Management Tool].
Configure the setting for sending counter information managed by this ma-
chine to a registered E-mail address.
For details, refer to [User's Guide: Web Management Tool].
Send a ping to the device communicating with this machine to check that
the correct connection has been made.
For details, refer to [User's Guide: Web Management Tool].
Select whether to enable SLP (Service Location Protocol).
For details, refer to [User's Guide: Web Management Tool].
Select whether to enable LPD (Line Printer Daemon).
For details, refer to [User's Guide: Web Management Tool].
Register a prefix or suffix of an E-mail address. Also, configure the setting
for recalling the registered prefix and suffix when entering an E-mail ad-
dress.
For details, refer to page 13-22.
Select whether to display network error code on the Touch Panel.
For details, refer to [User's Guide: Web Management Tool].
13
13-21