Figure 6.1.1 Poly-In/ Poly-Out - GBC TITAN 110 Operation & Maintenance Manual

Titan 110/ 165 Operation and Maintenance Manual
x) After the last image has cleared the rear cut-off
blade, trim the web from the laminator.
y) Raise the rollers.
z) Remove the web from the laminator and clean
any adhesive that may have contacted the
rollers.
© GBC Films Group November 2000
Figure 6.1.1 Poly-in / Poly-out
Poly-in
Poly-out
INFORMATION
Use the appropriate diagram for the
type of film you are using.
Applications
Poly-in
Poly-out
Page 6 - 13