Film Brake Adjustment - GBC TITAN 110 Operation & Maintenance Manual

Installation

4.9 Film brake adjustment

Perform each of the following steps for
the upper and lower unwind shafts while standing to the
right of the front operating position.
Illustrations are for the upper unwind. The lower
unwind is identical to the upper unwind with the exception
of the saddle for the film brake adjustment assembly.
Extreme caution should always be exercised
working around the core gripper support,
the gripper tabs can cut you!
a) Use one hand to rotate the unwind shaft while
the other hand is turning the film brake
adjustment dial clockwise with the other hand.
Page 4 - 18
WARNING
Titan 110/ 165 Operation and Maintenance Manual
- As you turn the film brake adjustment dial, you
feel an increase in resistance while turning the
unwind shaft.
b) Rotate the unwind shaft while turning the film
brake adjustment dial counter clockwise.
- As you turn the film brake adjustment dial, you
feel a decrease in resistance while turning the
unwind shaft.
c) Perform the same steps for the lower unwind
shaft and brake.
© GBC Films Group November 2000