Mounting - GBC TITAN 110 Operation & Maintenance Manual

Titan 110/ 165 Operation and Maintenance Manual
q) After the last image has cleared the rear cut-off
blade, trim the web from the laminator.
r) Raise the rollers.
s) Remove the web from the laminator and clean
any adhesive that may have contacted the
rollers.
© GBC Films Group November 2000

6.2 Mounting

Follow the procedure below to use the Titan 110/
165 for pressure sensitive mounting.
Materials need
• Images with laminate and mount adhesive
( typical decal )
• Substrate
( compatible with the mount adhesive used )
INFORMATION
The Titan 110 is used for illustration
purposes. The procedure is the same
for the Titan 165.
a) Press power to " ON ".
Applications
Page 6 - 5