Rear Cut-Off - GBC TITAN 110 Operation & Maintenance Manual

Operations
5.9 Rear cut-off blade
Caution should always be exercised when
using the rear cut-off blade.
Sharp blade can cut you!
The rear cut-off blade is intended to cut the
web output from the laminator and should not be used
for any other purposes.
Stop the laminator before using the rear
cut-off blade. Moving material can
damage the rear cut-off blade!
Keep hands and fingers away from the
path of the rear cut-off blade.
Sharp blade can cut you!
Page 5 - 16
WARNING
CAUTION
WARNING
Titan 110/ 165 Operation and Maintenance Manual
a) Slide the rear cut-off blade about six inches
into the web.
Keep hands and fingers away from the
bottom of the rear cut-off blade.
Sharp blade can cut you!
b) Press and hold down the blade engage lever.
c) Slide the rear cut-off blade from one side to
the opposite side then release.
© GBC Films Group November 2000
WARNING