Clean The Cabinets And Covers - GBC TITAN 110 Operation & Maintenance Manual

Titan 110/ 165 Operation and Maintenance Manual
INFORMATION
Rollers only turn in reverse while
depressing
e) Repeat steps "c" and "d" until the rollers are
clean.
f) Replace the feed table, pressure plate and front
safety shield.
g) Press POWER to "0".
© GBC Films Group November 2000
.
REVERSE
8.3 Clean the cabinets and
covers
Remove power from the laminator before
cleaning. You can be severely shocked,
killed or cause a fire.
a) Use a damp cotton terry cloth ( water only ),
clean the exterior of the laminator.
b) If water is not strong enough, you may use a
mild dishwashing detergent with water and a
cotton terry cloth.
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
killed or cause a fire. Use only a damp cloth
for cleaning unless other wise specified.
Maintenance
ELECTRICAL
S H O C K
ELECTRICAL
S H O C K
Page 8 - 7