Table of Contents
Advertisement
7 After Installation
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Press [
] three times.
•
The fourth page is displayed.
4.
Use [
][
] to select "Self Diag." and press
[Enter].
•
The self diagnosis screen is displayed with the
dialogue box.
Note
•
You can hide or display the dialogue box by
pressing [B].
•
Set the microphone at least 1 m away from
the speakers.
5.
Press [R].
•
The self diagnosis starts.
Note
•
Check the image that is displayed from the
main video camera.
•
To avoid feedback, slowly raise the volume
using the remote control's [+] button.
•
When someone speaks into the
microphone, confirm whether the sound
plays back through the speakers.
•
During self diagnosis, all Boundary
Microphones will be set to "Center stereo".
•
During self diagnosis, the tone will be set to
"Standard".
46
Installation Manual
6.
Press [R].
•
The self diagnosis ends.
Note
•
If you do not press [R], the self diagnosis
will automatically end after about
10 minutes.
7.
Press [Home].
•
The Home screen is displayed.
Making a Video Conference Call to
the Panasonic HD Visual
Communication Test Site
You can make a video conference call to the Panasonic
HD Visual Communication test site by entering the IP
address using the remote control.
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Select "Manual Dial" using [
[Enter].
•
The Input screen is displayed.
3.
Select "Multi-Point" using [
4.
Select "No" using [
5.
Select "Site 1" using [
6.
Enter the IP address.
7.
Use [
][
] to select "Call Type".
8.
Use [
][
] to select "SIP" or "H.323".
][
], then press
][
].
][
].
][
].
Advertisement
Table of Contents
