Preparing The Unit; Turning On The Power - Panasonic KX-VC300CN Installation Manual

5 Connection and Preparation
Connecting the Display with a
Component Cable
If your display does not have an HDMI terminal, use a
component cable for connection.
1.
Connect the display to the Component terminal on
the back of the unit using a component cable.
Note
•
To use the display's speakers to output audio,
connect the display to the Audio Out L/R jack
(Page 16) on the back of the unit using a stereo
pin plug cable.
26 Installation Manual

5.3 Preparing the Unit

Turning on the Power

Note
•
Confirm that the power of all peripheral devices
(e.g., display, main video camera) is on.
1
1.
Press the Power button on the front of the unit.
•
The Power LED turns on. Then, the Status LED
starts flashing blue slowly, and the Home
screen is displayed.
•
When you turn the power on for the first time,
the Initial Settings screen is displayed
(Page 32).