Table of Contents
Advertisement
6 Settings and Confirmation
6.2 Initial Settings
After turning the unit on, you need to set the language,
device name, date and time, and network settings.
These settings can be changed later.
1.
Press the Power button to turn on the unit.
•
The language settings screen is displayed.
2.
Press [Enter] and use [
language ("
"
").
3.
Press [Enter].
4.
Press [G].
5.
Use [
][
] to select " " and press [Enter].
•
The device name setting screen is displayed.
6.
Enter a name for the device (up to 24 characters)
(Page 28).
7.
Press [G].
8.
Select "Yes" using [
•
The date and time setting screen is displayed.
32
Installation Manual
][
] to select the desired
" [default], "English",
][
], then press [Enter].
9.
Select the item using [
information.
•
Enter the year (4 digits), month (1–2 digits), day
(1–2 digits), time (24 hour display), and select
the date format (Month/Day/Year, Day/Month/
Year, Year/Month/Day) and the hour display
format (12h/24h).
10.
Press [G].
11.
Select "Yes" using [
•
The network settings screen is displayed.
12.
Use [
][
] to select the following items for input:
"IP Address": Use [
IP address information for this unit ("IP Address",
"Subnet mask", "Default Gateway") will be
obtained automatically from a DHCP server or will
be set manually.
–
"Auto" (default): Obtain the IP address
information automatically.
–
"Manual": Set the IP address information
manually.
][
], then input
][
], then press [Enter].
][
] to select whether the
Advertisement
Table of Contents
