Lcd General Features - Biasi Inovia 25S ERP User Manual And Installation Instructions

heating flow timer)
18 LCD display
RESET that takes all parameters
back to the factory value occurs
only by
08=04". Reset is displayed by
switch on of all symbols present
on the display.
Press keys 13 and 17 (Fig. 1.3)
simultaneously for 5 seconds in
order to reset all the scheduling
(both preheating and heating).
After resetting or in default sta-
tus, the heating function will be
activated for every day, for all 24
hours.
This is also the default status of
boilers upon delivery.
Resetting will be confirmed by
a flashing RESET along with the
symbol
APPLIANCE DESCRIPTION
setting "parameter
.
1.4

LCD general features

For the boiler technical informations refer to
the section "TECHNICAL INFORMATION"
to page 24.
Fig. 1.4
KEY
All symbols repre-
sented with lines
that surround them,
indicate that the
symbol is flashing.
Constantly illuminat-
ed: chimney sweep
function enabled.
Constantly illumi-
nated: the presence
of this symbol dur-
ing normal operation
indicates that the
heating or preheat-
ing timer has been
set.
Flashing: this indi-
cates that the clock
has not yet been set
by the user.
Constantly illumi-
nated: boiler power
delayed by inhibi-
tor (AFCT) or other
events.
- 9 -