Biasi Inovia 25S ERP User Manual And Installation Instructions page 18

9
10
11
12 13
Fig. 2.16
Below are the different settings:
- oFF = Override function disabled (clear
any pre setup override program).
- ch on = Timed manual heating function
active (on for "x" period), (
and will flash).
- ch oF = Timed manual heating function off
(off for "x" period), (
flash).
Activation:
Press keys 15 and 16 (Fig. 2.16) at the same
time for 2 seconds to enter programme
menu (Fig. 2.17).
Fig. 2.17
Press key 12 (Fig. 2.16) to modify the func-
tion status: (12 scrolls through Menu oFF,
ch on, ch oFF) Fig. 2.18.
Fig. 2.18
- 18 -
INSTRUCTIONS FOR USE
17
16
15
14
,
and will
Press keys 9 or 10 (Fig. 2.16) to programme
the forced heating function Minimum 1 hour
to Maximum 30 days (The above example
has been set for ch on for 1 day) (Fig. 2.19).
Fig. 2.19
Press key 17 briefly to save (Fig. 2.20).
Fig. 2.20
To exit programming without making any
changes press keys 15 and 16 (Fig. 2.16) at
same time for 2 seconds.
N.B.: The following settings are also reset
along with the time bracket.
Deactivation / End of function:
The function programme will end when the
time set passes in our example 1 day or
when the function status is manually set to
"oFF".
Manually Turn off:
Hold down keys 15 and 16 (Fig. 2.16) at the
same time for 2 seconds until the remaining
time and status of the programme appears
on the LCD display.
Press key 12 (Fig. 2.16) to modify the status
to "oFF".
Press key 17 briefly to save (Fig. 2.21).