Biasi Inovia 25S ERP User Manual And Installation Instructions page 61

display corresponds to 2.5 seconds). Ex.
17=42 seconds.
• The writing P11 - SEt alternates on the dis-
play (Fig. 7.30).
Fig. 7.30
• By pressing key 12 (Fig. 7.27) confirmation
of the inserted value is obtained.
• Press keys 15 or 16 (Fig. 7.27) to exit with-
out changing the value.
• Exiting the "programming mode" is auto-
matic, after 15 minutes, or by cutting power.
Programming using the REMOTE control
• Press button for more than 3 seconds to
enter in mode (Fig. 7.31).
0
21 3
1 8 6
9
1 5
1 2
Fig. 7.31
and
• Press buttons
time to enter transparent programming (Fig.
7.32).
COMMISSIONING
Fig. 7.32
• Press buttons
"PM11" program of the pump post-circula-
tion (Fig. 7.33).
Fig. 7.33
• To modify the programmed SET, act on
buttons
grammed number to flash (Fig. 7.34). Each
step increased or decreased corresponds to
1 second.
at the same
Fig. 7.34
• To exit programming, press button .
or to display the
or and wait for the pro-
- 61 -