5: Dsk; 6: Audio Input - Roland V-60HD Reference Manual

Menu List

5: DSK

Menu item Value
(bold text: default value)
SDI IN 1–4, HDMI IN 5,
DSK SOURCE CH HDMI/RGB IN
STILL/BKG IN 8
This specifies the key type (extraction color) used during DSK composition.
LUMINANCE-WHITE
KEY TYPE LUMINANCE-BLACK
CHROMA-GREEN
CHROMA-BLUE
KEY LEVEL 0–64–255
KEY GAIN 0–255
MIX LEVEL 0–255
HUE WIDTH -128–0–127 (*14)
HUE FINE -128–0–127 (*14)
SATURATION WIDTH -128–0–127 (*14)
SATURATION FINE 0–255 (*14)
PGM OUT OFF, ON
PVW OUT OFF, ON
(*14) This is applied when "KEY TYPE" is set to "CHROMA-GREEN" or "CHROMA-BLUE. "

6: AUDIO INPUT

Menu item Value
(bold text: default value)
AUDIO IN 1–4
HEAD AMP GAIN 0–64dB
DIGITAL GAIN -42.0–0
INPUT LEVEL -INF–10.0dB
INPUT MUTE OFF, ON
PHANTOM +48V OFF, ON
PAN LEFT–CENTER–RIGHT
HPF 75Hz OFF, ON
DELAY 0 0–12.0frame
GATE OFF, ON
THRESHOLD -80.0– -50
RELEASE 30–860–5000ms
OFF, ON
COMP/LMT
THRESHOLD -30
-60.0–
1.00:1, 1.12:1, 1.25:1, 1.40:1,
1.60:1, 1.80:1, 2.00:1, 2.50:1,
RATIO
3.20:1, 4.00:1,
16.0:1, INF:1
ATTACK
0.2–1–100ms
RELEASE
30–380–5000ms
AUTO GAIN ON
OFF,
MAKEUP GAIN 0–40dB
-40–0
6
Explanation
During DSK compositing, this specifies the channel of the overlaid logo or image.
6, STILL/BKG IN 7,
Setting this to "STILL/BKG IN 7" or "STILL/BKG IN 8" performs DSK composition using a still image
saved in the unit.
This uses a brightness threshold to make white transparent.
This uses a brightness threshold to make black transparent.
This uses a color threshold to make green transparent.
This uses a color threshold to make blue transparent.
This adjusts the degree of extraction (transparency) for the key.
This adjusts the degree of edge blur (semi-transmissive region) for the key.
This adjusts the key's overall density (output level).
This adjusts the hue width for the key color.
This adjusts the center position of the hue for the key color.
This adjusts the saturation width for the key color.
This adjusts the center position of saturation for the key color.
This sets DSK composition on or off. When this is turned on, the results of DSK composition are
sent to final output.
* When the menu is used to turn on DSK composition, the video is composited immediately,
regardless of the length of time set for video transitions.
Setting this to "ON" makes the DSK compositing results the preview output.
* The [PVW] button functions as a shortcut for "PVW OUT. "
Explanation
This adjusts head amp gain. Head amp gain adjusts analog audio.
This adjusts digital gain. Digital gain adjusts digital audio internally converted from analog to digital
0–42.0dB
in the V-60HD.
This adjusts the volume level of input audio.
This sets the Mute feature on or off. Input audio for which this is set to "ON" is silenced.
This sets phantom power on or off. When this is set to "ON, " phantom power is supplied via the
AUDIO IN jacks.
This adjusts the sound position (pan).
This sets the high-pass filter on or off.
Effect This cuts off unneeded low-band audio. The cutoff frequency is 75 Hz.
This adjusts the delay time for input audio.
Effect This outputs audio with a delay.
This sets gate on or off.
Effect This mutes audio that is below a specified level.
0–0.0dB This sets the level used as the threshold for removing audio. Audio below the level set here is removed.
This adjusts the length of time until the audio is fully attenuated after audio falls below the threshold.
This sets the compressor on or off.
Effect This compresses audio that exceeds a specified level.
This sets the level used as the threshold at which the compressor is applied. Compression is applied
0–0.0dB
to audio that exceeds the threshold.
This species the degree of compression applied to the audio. The state in which no compression is
5 60:1, 8.00:1, applied is defined as "1. "
This sets the time until compression starts when audio exceeding the threshold is input.
This adjusts the length of time until compression ends after audio falls below the threshold.
This switches the auto makeup gain feature on and off.
When this is set to "ON, " the final output volume level after applying the compressor is
automatically adjusted according to the "THRESHOLD" and "RATIO" settings.
The total of the "MAKEUP GAIN" setting value described below and the value calculated by auto
makeup gain becomes the final output volume level (up to +34 dB).
This adjusts the final output volume level after applying the compressor.