Assigning A Video Source To Channel 3; Switching The View Mode Of Preview Output - Roland V-1SDI Owner's Manual

Video Input/Output Settings
Assigning a Video Source to
Channel 3
By factory default, the selection of SDI input or
HDMI input for channel 3 is set to "AUTO" (automatic
detection of the connection). When devices are
connected to both the SDI IN 3 connector and the
HDMI IN 3 connector, SDI input takes precedence.
When you want to input video via a specified
connector, change this setting.
1.
Display the SETUP menu (p. 12), then select
"CH3 INPUT SELECT."
2.
Use the A/B fader to specify the video source to
input on channel 3.
Value Explanation
The connector where the connection is made
is automatically detected and video is output.
AUTO
When devices are connected to both the SDI
IN 3 connector and the HDMI IN 3 connector,
SDI input takes precedence.
SDI Video is input only via the SDI IN 3 connector.
Video is input only via the HDMI IN 3
HDMI
connector.
3.
Quit the menu (p. 12).
16
Switching the View Mode of
Preview Output
Three types of view modes are available for the
V-1SDI's preview output. You can set the view mode
individually for the PVW connector (SDI) and the
MULTI-VIEW connector (HDMI).
1.
Display the SETUP menu (p. 12), then select
"PVW ASSIGN" (PVW connector) or "OUTPUT
ASSIGN" (MULTI-VIEW connector).
2.
Use the A/B fader to set the view mode.
Value Explanation
This displays the incoming video on channels
1 through 4 as a four-way split screen.
Channel
Channel
The video is displayed with a colored border
that is interlinked with the selected [A-1]
through [A-4] or [B-1] through [B-4] button.
MULTI-
Red border:
VIEW
Green border: Video to be output next
Displaying the audio level meter
* This is displayed at the bottom of the
screen only for output from the MULTI-VIEW
connector (HDMI).
Indication Input/output name
IN1 SDI IN 1
IN2 SDI IN 2
SDI IN 3 or
IN3
HDMI IN 3
IN4 HDMI IN 4
AUD AUDIO IN
MIC MIC
OUT MASTER OUT
PGM This displays the video currently being output.
PST This displays the video to be output next.
* Labels for identifying SDI and HDMI in all view modes
are displayed only for output from the MULTI-VIEW
connector (HDMI).
3.
Quit the menu (p. 12).
1 2
Channel
3 4
Channel
Audio level meter
Video currently being output
Level
(dB)
0
-6
-10
-20
-30
-40
-50
Red
Yellow
Green