Sending The Hex File - Symbol PPT 8800 Product Reference Manual

PPT 8800 with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
6. A check will be performed and if there are no errors, the partition hex files are
created.
If the build fails, the hex files are not be created and TCM displays an error message. Two
of the most common reasons for a build failure are:
• Files defined in the script can not be found. This error can occur when the files
referenced by the script are no longer stored on the host computer or the folders
where they are stored were renamed.
• The total amount of flash memory space required by the script exceeds the image
size. To correct this, reduce the number of files in the partition or increase the size
of the partition. See
setting the image size appropriately.

Sending the Hex File

Once the hex file is built, it can be downloaded to the terminal.
1. Connect the Serial Charging Cable or the Single-Slot Cradle to the development
computer.
Figure 9-5. Cradle Connection to Development Computer
9-10
Defining Script Properties on page 9-6 for more information on
Serial device
cable