Using The Universal Cable Cup - Symbol PPT 8800 Product Reference Manual

Using the Universal Cable Cup

1. Ensure that ActiveSync was installed on the host computer and a partnership was
created. See
page 4-4.
2. Start ActiveSync if it is not running on the host computer. To start, select Start -
Programs - Microsoft ActiveSync. The Microsoft ActiveSync window appears.
Note: Every terminal should have a unique device name. Never try to
synchronize more than one terminal to the same name. See
ID on page 3-26 for instructions on changing the device name.
3. Ensure that locking tabs on the cable cup are in the open position (up).
4. Insert the terminal into the cable cup.
5. Press down on the two locking tabs.
6. Pull on the cable cup to ensure that it is securely seated on the terminal.
Installing ActiveSync
Figure 4-12. ActiveSync - Not Connected
on page 4-3 and Setting up a Partnership
Communication
on
Device
4-15