Symbol PPT 8800 Product Reference Manual page 261

13. If the correct hex file is not displayed in the HEX FILE TO LOAD field, click Browse
and navigate to the correct hex file to be downloaded.
14. Select the COM port being used from the Comm Port drop-down list. Ports already
in use display in the Unavailable ports field.
15. Select the appropriate baud rate from the Baud Rate drop-down list.
16. Select NONE from the Protocol drop-down list.
17. Insert the terminal in a cradle, or connect it to a development computer with a serial
cable.
18. Click OK to load the file, or Multiple Hex File Download if more than one file is
being loaded.
19. As soon as the first character of data is received, IPL displays the Receiving Data
screen.
Note: If the partition being downloaded was set to first erase the flash, the
message "Pre-Erasing Flash" first appears before downloading
begins.
IPL VER X.XX
Partition Name
Downloading Data
Processing XXXXX KB
of YYYYY KB image
Figure 9-11. Receiving Data Screen
Configuring the Terminal
9-15