Misc(2) Tab - Symbol PPT 8800 Product Reference Manual

Misc(2) Tab

This tab is used to configure various miscellaneous features.
Field
Auto-retry This field is used to specify whether the AirBEAM Smart Client automatically
retries if there is a failure during the synchronization process.
If this feature is enabled, the AirBEAM Smart Client displays a popup dialog
indicating the attempt of a retry. The popup dialog is displayed for the number of
seconds specified in the Retry Delay field.
The valid values for this field are:
Retry Delay This field specifies the amount of time, in seconds, that the AirBEAM Smart Client
delays before automatically retrying after a synchronization failure.
In-use Test This check box specifies whether the AirBEAM Smart Client tests to determine if
a file is in-use before downloading. If the In-use Test feature is enabled, the
AirBEAM Smart Client downloads a temporary copy of any files that are in-use. If
any temporary in-use files are downloaded the AirBEAM Smart Client
automatically resets the client to complete the copy of the in-use files. If the In-
use Test feature is disabled, the synchronization process fails (-813) if any
download files are in-use.
Wait Welcome This check box specifies whether the AirBEAM Smart Client waits for the
WELCOME windows to be completed before automatically launching the
synchronization process after a reset.
Close Apps This check box specifies whether the AirBEAM Smart Client automatically
attempts to close non-system applications prior to resetting the mobile unit. If
enabled the AirBEAM Smart Client sends a WM_CLOSE message to all non-
system applications before resetting the mobile unit. This feature offers
applications the opportunity to prepare (i.e. close open files) for the pending reset.
-1: the AirBEAM Smart Client automatically retries indefinitely.
0: the AirBEAM Smart Client does not automatically retry.
-0: the AirBEAM Smart Client automatically retries up to the number of times
specified.
Description
AirBEAM Smart
6-9