Flash Backup Unit; Installing An Fbu In A 2.5-Inch Hdd Chassis; Preliminary Steps - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX2530 M1:
Table of Contents

Advertisement

Expansion cards and backup units
9.6

Flash Backup unit

The FBU backs up the memory contents of the RAID controller in the event of
a power failure. You can install one FBU.
Depending on the chassis (3.5-inch HDD chassis or 2.5-inch HDD chassis)
the installation in the FBU holder and the position for the FBU holder are
different.
9.6.1

Installing an FBU in a 2.5-inch HDD chassis

Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 / (+) No. 1 screw driver (for installing TFM)
9.6.1.1

Preliminary steps

"Disabling SVOM boot watchdog functionality" on page 72
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
208
Upgrade and Maintenance Manual
Hardware: 15 minutes
RX2530 M1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primergy rx2530 m2

Table of Contents